Sale!

Great White Paver Sealer Remover and Paint Stripper

$289.00 $279.00

Great White CS is an environmentally friendly, biodegradable, low odor coatings stripper designed to remove multiple layers of various types of coatings. Great White CS contains no Methylene Chloride, N-Methyl-Pyrrolidone, or caustics. Great White CS performs by penetrating and softening the coating film. The all-natural and biodegradable characteristics make Great White CS safe, easy to use, and practical for most stripping applications. Great White CS will not damage tools and equipment like most chemical strippers.

Description

Great White Paver Sealer Remover and Paint Stripper

Great White CS is an environmentally friendly, biodegradable, low odor coatings stripper designed to remove multiple layers of various types of coatings. Great White CS contains no Methylene Chloride, N-Methyl-Pyrrolidone, or caustics. Great White CS performs by penetrating and softening the coating film. The all-natural and biodegradable characteristics make Great White CS safe, easy to use, and practical for most stripping applications. Great White CS will not damage tools and equipment like most chemical strippers:

  • Ideal for removing acrylics, enamels, epoxies, lacquers, latex’s, moisture-cured coatings, patio sealer and urethane’s from most substrates.
  • High flash point
  • High loading capacity makes stripper last longer.
  • Low evaporation rate allows for long stripper on substrate dwell times and lower volume use due to fewer reapplications resulting from solvent evaporation before the coating or paver sealer is removed.
  • Will not harm aluminum, composites, concrete, metal, steel or wood

RECOMMENDED USES: 

Great White CS will remove most sealers, paints and varnishes, both solvent and water-based, including latex products, acrylics, alkyds, stains, lacquers, urethanes, epoxies and more.  It may be applied to virtually any substrate and will not damage the substrate nor will it harm the environment or be detrimental to animals or humans.  

APPLICATION:

Before applying Great White CS, ensure all areas not being stripped are fully protected.  Great White CS should be applied directly from the container using a brush, roller, or spray.  Ensure all surfaces are dry prior to stripping.  Water will deactivate the stripping action.  Great White CS is not as effective when applied to a hot surface.  If the area being stripped is in direct sunlight, covering the area with plastic is recommended after applying the Great White CS to avoid evaporation.  Great White CS is not harmful if it contacts the skin, however, neoprene gloves and goggles are recommended.  Contact with Great White CS may cause skin irritations.

  1. Apply a liberal amount of Great White CS to the surface requiring stripping.
  2. Work Great White CS into grooved areas.
  3. Allow Great White CS to stand for a minimum of 20-30 minutes.  Weather conditions, type of coating being removed, and coating thickness will determine how long Great White CS must dwell for stripping action to develop.  
  4. After softening of paint film begins and the film starts to wrinkle or blister simply scrape or pressure wash film off of the substrate.  
  5. Water will deactivate the stripper.  
  6. Do not allow Great White CS to dry prior to removing it.  Great White CS deactivates when it dries.
  7. Additional applications of Great White CS may be required to remove multiple layers of paint or stubborn coatings.
  8. After stripping, the substrate should be washed with a degreasing detergent. 

Clean-Up:

Clean tools and equipment with soap and freshwater.  

Coverage (Theoretical):

Coverage will vary depending on coating thickness, surface porosity, and surface contour.  Coverage typically averages 100-150 square feet per gallon.

Note: 

Do not store in direct sunlight.

 

CAUTION: KEEP OUT OF REACH OF CHILDREN!