Step 1. Using recommended protection, carefully apply properly diluted solution using a sprayer, roller and/or sponge. Make sure to wear eye protection (Goggles) and rubber gloves.

NOTE: Solution may etch polished surfaces or stain anodized aluminum unless rinsed off quickly. Some surfaces may require sample testing of a small area to determine optimum concentration. Dilute solution with water according to dilution chart for less penetration of sensitive surfaces.

Step 2.  Wait up to 15 minutes. Reaction time takes several minutes, however, additional time may be required depending on grease age and thickness.

Step 3. Rinse thoroughly with water.